User Tools

Key Operator Tools

The key operator must set the following items. For settings or more infor- mation, contact the key operator.

It is recommended that the key operator program a key operator code when performing the settings. See p.40 “Key Operator Code”.

User Code Man.: Copier

Allows you to control who uses the machine by setting codes for users.

4

User codes must be registered for

user code management.

Note

Default: Off

Key Counter Management

Use the key counter to specify whether users are restricted or not.

Note

Default: Off

[Key Counter Management] will only be displayed when the key counter is set.

Key Operator Code

Specify whether or not to use pass- words (max. eight digits) to con- trol Key Operator Tools settings for key operator code.

Note

Default: Off

If you select [On], enter the key operator code (max. eight dig- its) using the number keys, and then select [On:Partial] or [On:All] to set the access limit.

If you selected [On:Partial]

A key operator code is only required for the Timer Set- tings and Key Operator Tools for System Settings.

If you selected [On:All]

A key operator code is re- quired to access all items in System Settings and Copier Features.

If you select [On:All], you must enter a key operator code to ac- cess the Key Operator Code dis- play.

Display/Print Counter

Allows you to view and print the number of prints.

• Display/Print Counter Displays the number of prints for each function (Total, Copier and A3/DLT).

• Print Counter List

Prints out a list of the number of prints made under each func- tion.

• To print the counter list

APress the {User Tools/Counter} key.

 

User Tools/Counter

ClearModes

ABC

DEF

Clear/Stop

 

 

JKLMNO

Start

TUVWXYZ

APE044S

40