Maintaining Your Machine

Maintaining Your Machine

If the exposure glass, exposure glass cover or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.

Cleaning the machine

Wipe the machine with a soft, damp cloth. Then wipe it with a dry cloth to remove the water.

Important

Do not use chemical cleaner or or- ganic solvents such as thinner or benzene. If such substances get in- side the machine or melt plastic parts, a failure might occur.

Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative.

Cleaning the Exposure Glass Cover

TRSR140E

Cleaning the ADF

Cleaning the Exposure Glass

7

 

ND1C0200

67