
x Clearing Misfeeds
•Bound, stapled, or clipped originals
•OHP transparencies
•Translucent paper
•Pasted originals
Note
❒The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead- ing edge margin is at least 5 mm, 0.2".
Original |
a
❒a: 5 mm, 0.2"
❒Remove staples or clips of originals. Fan originals that have had staples or clips removed.
When “x”, “B” and “A” light up
A paper misfeed occurs in the paper feed section.
RCAUTION:
•Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters.
A Lower the paper feed tray adjustment lever.
B Slowly but firmly pull out the paper.
4
47