Operation
Adjusting the Print Image Position
After master making, you can adjust
1 the print image position to suit your needs. There are two ways to do this:
❖Shifting the Image Position Forwards or Backwards
Adjust the image position using the {Image Position} keys.
❖Shifting the Image Position to the Right or Left
Adjust the image position by shift- ing the paper in the paper feed tray.
A Press the left {Image Position} key to move the image forwards, and the right key to move it back- wards.
Shifting the Print Image Position Forwards or Backwards
GRFORW0E |
* Paper feed direction
Note
❒When you shift the image for- wards, leave a margin (more than 5 mm, 0.2") at the leading edge. If there is no margin, pa- per might wrap around the drum and cause a misfeed.
❒The right or left {Image Position} keys shift the image about 1 mm, 0.04" each time they are pressed. However, the indicator will only register a change when the image position is shifted about 5 mm, 0.2".
B Press the {Proof} key to check the image position.
18
