
Operation
Adjusting the Print Image Density
You can adjust the print image densi-
1 ty to suit your needs. There are two ways to do this:
❖Before Making a Master
Adjust the image density using the
{Image Density}key.
❖After Making a Master
Adjust the image density using the
{Speed}key.
Before Making a Master
A Use the {Image Density}key before pressing the {Master Making}key.
After Making a Master
A Press the {Speed} key to decrease the printing speed. Press it again to bring the printing speed back to Fast.
Note
❒ The faster the printing speed be- comes, the lighter the printing density is. If you want darker prints, decrease the printing speed.
Note
❒In addition to Normal, Darker and Lighter modes, you can also select Tint mode to make half- tone prints. When the Lighter mode indicator is blinking, Tint mode is selected.
20