
Replenishing Supplies
Master Roll Replacement
The Master End indicator (C) lights up when it is time to replace the mas- ter roll.
A Open the right side cover.
3 |
B Open the plotter cover.
TSLH02EE |
C Remove the used master roll and pull out both spools. Then, insert both spools into a new master roll.
TSLT010E |
Note
❒When the Master End indicator lights up, it is necessary to re- place the master roll even if some master remains on the old roll.
D Make sure that the new master roll is positioned as shown in the illustration.
TSLH01XE |
E Set the paper edge of the master roll as shown.
TSLH01UE |
Note
❒Rotate the spools backward to take up any slack in the master.
42