A4/LT LCT (RT43)

An alternative to the A3/DLT LCT, the 4000 sheet A4/LT LCT provides the means to dramatically increase the online capacity of A4 paper. With the A4 LCT fitted, the paper capacity of the Aficio MP C6000 and MP C7500 is increased to 7400 sheets. The maximum paper weight that can be fed via the aA4 LCT is 128 g/m2. This unit does not connect via the bypass feed which means that heavyweight media can still be fed through the bypass unit.

A3 DLT Tray

An optional A3 tray replaces the 2 x 1000 sheet A4 tandem tray. This unit converts the top tray to A3 format and increases the machine’s A3 capability. This can be important in environments where the bulk of output is A3 or where work will be produced two up and trimmed to A4 after production.

Z Folding Unit (Z4000)

This unit is common to the MP9000/1100/1350 series and provides the means to fold A3/DLT paper into A4/LT size documents and A4/LT size paper into A5/HLT size documents for use and filing. This option will find applications in both the General Office market (in finance departments for example where spreadsheets and reports are produced) and in Light Production (where there 4 page leaflets and fliers are produced). This unit can be attached to either the 100 Sheet Staple Finisher (SR5000) or the 50 Sheet Staple Finisher ( SR4010).

100 Sheet Staple Finisher (SR5000)

The SR5000 brings production-level finishing to high volume environments with 3,000 sheet capacity for long periods of unattended operation. The finisher has two delivery

positions; a 500 sheet proof tray delivers loose material for easy collection, whilst the 3000 sheet shift tray delivers finished documents sets.

The finisher has a fully integrated jogger which installs on top of the Shift Tray and gently taps collated sets into perfect alignment prior to stapling for a flush edge. A new triple pre- stack design improves stapling productivity to 100%. 100 sheet per set stapling capacity allows thick documents to be professionally finished. Multiple staple positions enable proper binding of documents in all paper sizes/ orientations.

The system temporarily stops printing when 3,000 sheet shift tray capacity is reached and restarts automatically when emptied. The shift tray offset stacks document sets that are not stapled for easier set separation.

Please note that an optional Finisher Adapter is necessary when you connect the SR5000 to the MP C6000 and MP C7500.

2 / 4 Hole Punch

An option for the SR5000 finisher, the hole punch provides full-speed on-line punching of documents in either 2 or 4 hole format. The user selects which hole format is required through the print driver or at the touch panel. The system saves the user manually punching documents after production or using more expensive pre-punched paper.

50 Sheet Staple Finisher (SR4010)

There is also a 50 sheet staple finisher option for Aficio MP C6000 and MP C75000. This unit can staple up to 50 sheets of paper in four positions. The shift tray will hold 3000 sheets and the proof tray, another 250 sheets. This finisher id likely to be the preferred option for the General Office market. There is a 2/4 hole punch option for this finisher (Punch Unit Type 3260) and a jogger option (Output Jogger Unit Type 3260).

Key Selling Points

32

 

 

Page 32
Image 32
Ricoh MP C6000, MP C7500 manual A4/LT LCT RT43, A3 DLT Tray, Folding Unit Z4000, Sheet Staple Finisher SR5000