Ricoh MP C7500 Sheet Finisher with Saddle Stitch Staple SR4020, Source Cover Interposer CI5000

2000 Sheet Finisher with Saddle Stitch Staple (SR4020)

The 2000 sheet booklet maker option is a staple finishing and saddle stitch finishing option for the General Office market. The shift tray will hold up to 2000 sheets stapled in up to 5 positions including saddle stitch. The unit will also staple Z folded documents produced using the Z fold option. With this unit, the customer can produce normal collated and stapled document sets or professionally finished colour booklets of up to 60 sides (15 sheets) in-house. There is a 2/4 hole punch option for this finisher (Punch Unit Type 3260) and a jogger option (Jogger Type 3260).

2 Source Cover Interposer (CI5000)

A 2 station cover sheet interposer can be installed between the mainframe and finisher. The interposer is used to feed pre-printed material for inclusion as covers. The interposer has a dual 200 sheet capacity and will feed material of up to 216gsm.

This option allows users to insert pre-printed or full colour sheets into live job streams for collation and finishing. It provides cost effective pre-printed integration with new print output. Dual trays allows for different covers to be placed on the front and back of each set.

Cover Interposer (CI3260)

There is also a single source cover interposer option for Aficio MP C6000 and MP C75000. The single tray version can feed up to 200 font/back covers of A5 to A3 size paper and weights of up to 216g/m2..

9-Bin Mail Box (CS391)

CS391 is 9-Bin Mailbox option which can be attached to the 50 sheet Staple Finisher & Saddle Stitch Staple Finisher. Ideal for the general Office, it allows users to route finished print jobs to a mail box for collection when convenient. Each mail box tray will hold up to 100 sheets. Please not, CS391 can not attach to the 100 sheet Staple Finisher (SR5000).

GBC Stream Punch

The GBC Stream Punch is a third party punch system common to the Aficio MP 9000/1100/1350. It can be installed in combination with the SR5000 Finisher. The system will punch paper of weights of up to 216 g/m2 at full engine speed. Each sheet is punched individually. The punch unit is fully integrated and can be operated directly from the touch panel display or from the RPCS printer driver. With several different punch dies available, it can eliminate all manual off-line punching saving operators considerable manual effort and time.

Pre printed and colour sheets can be punched in-line using the new dual tray Interposer. Die sets are easily interchanged without special tools or levers to produce professionally finished manuals and guides with precise hole alignment for sets with pages that are easy to turn. The die sets available are:

-2/3/4 hole

-11 hole VeloBind

-19 hole CombBind

-21 hole WireBind

-32 hole WireBind

-44 hole ColorCoil

-32 hole ProClick

Key Selling Points 33