IMPORTANT SAFETY INSTRUCTIONS (Continued)
19.If glass components, including lens and lamp, should break, contact your sales representative for
repair service.
This product incorporates glass components, including a lens and a lamp.
If these should break, please handle with care to avoid injury and contact your sales representative for repair service. Avoid any broken pieces of glass since they may cause injury. In the unlikely event that the lamp ruptures, thoroughly clean the area around the projector and discard any edible items placed in that area since they may be contaminated.
22. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
(Only the replacement of the lamp should be made by users.)
23. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to verify that the product is in proper operating condition.
20. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
21.Do not place anything in front of the lens while the
projector is operating
Things placed in front of the lens may overheat and burn or start a fire.
If you want to temporarily stop the projected image, use the mute on the remote control.
24.Do not leave thermal- paper documents or easily deformed items on top
of the unit or near the air exhaust for long periods of
time.
The heat from the unit could erase the information on the thermal paper, or cause deformation or warping.
25. Do not use the product in a closed installation location.
Do not place the product in a box or in any other closed installation location. Otherwise it may overheat, which could result in a risk of fire.
