
SP 1000SF
4Hold it by its handle.
5Insert the cartridge in its slot by pushing it until it clicks (last move down) as shown on the picture below.
6Close the cover.
Starting your device
Device connection
Before plugging the power cord, it is WARNING imperative to refer to the Security
directives, page 1.1Plug the end of the telephone line into the terminal socket and the other end into the wall telephone socket.
Paper delivery stop
Adjust the paper delivery stop, depending on the format of the document to be printed. Do not forget to raise the flap to prevent the sheets from falling down.
2Connect the power cord to the device.
3Make sure that the On/Off switch is off (O position). Plug the power cord to outlet on the wall.
The power cord is used as a 230 V power unit cut off. As a precaution, WARNING the outlet shall be located close to the device and be of easy access in
case of danger.
4Press the On/Off button to turn on the device (I position).
5By default, the machine is set to operate in England and in English. To modify this parameter, refer to Country, page 26.
6Set the date and time, refer to Date/Time, page 26.
- 17 -