
SP 1000SF
1Select Automatic and confirm with OK.
2To exit this menu, press .
The machine proposes a 70 to 100 % reduction. Outside these values, the machine beeps for error. This fixed reduction will be used when printing received documents, regardless of the used paper format.
To set the manual mode :
246 - SETUP / RECEPTION / REDUCTION
1Select FIXED and confirm with OK.
2Enter the reduction value (between 70 and 100) and confirm with OK.
3To exit this menu, press .
Technical Parameters
As delivered your machine is preset by default. However, you may adjust it to meet your requirements by resetting the technical parameters.
To set the technical parameters:
29 - SETUP / TECHNICALS1Select the desired parameter and confirm with OK.
2 With the buttons | or , modify the parameter | |
settings by following the table below and press OK. | ||
Parameter |
| Signification |
| ||
|
| |
|
| |
1 - Scanning mode | Default value of the scan mode | |
| resolution for the documents to be | |
| transmitted. | |
|
| |
2 - TX header | If this parameter is on, your header | |
| will appear on all documents sent | |
| to your subscribers with your | |
| name, number, date and number of | |
| pages. | |
| Warning: If you send a fax from | |
| the document loader, the | |
| transmission header will not | |
| appear on the document your | |
| correspondent receives. | |
|
| |
3 - TX speed | Transmission speed for outgoing | |
| documents. | |
| For a quality telephone line | |
| (compatible, no echo), | |
| communications occur at | |
| maximum speed. | |
| However, it may be necessary to | |
| restrict the transmission speed for | |
| some calls. | |
|
|
|
Parameter |
| Signification | |
|
| ||
|
| ||
4 - Echo protect | If this parameter is on, the | ||
| echo will be reduced during long | ||
| distance calls. |
| |
|
| ||
6 - EPT mode | For some long distance calls | ||
| (satellite), the | ||
| disturb the call. |
| |
|
| ||
7 - COM. display | Choice between transmission | ||
| speed displayed or number of the | ||
| page in progress. |
| |
|
| ||
8 - Eco energy | Choosing the printer standby | ||
| delay: the printer will switch to | ||
| standby after a delay (in minutes) | ||
| of | ||
| period of time of your choice. | ||
|
| ||
10 - RX header | If this parameter is on, all | ||
| documents received by your fax | ||
| will include the subscriber’s header | ||
| with his name, number (if | ||
| available) fax print date and the | ||
| page number. |
| |
|
| ||
11 - RX speed | Transmission speed for incoming | ||
| documents. |
| |
| For a quality telephone line | ||
| (compatible, no echo), | ||
| communications occur at | ||
| maximum speed. |
| |
| However, it may be necessary to | ||
| restrict the transmission speed for | ||
| some calls. |
| |
|
| ||
12 - Rings | Number of rings to automatically | ||
| start your machine. |
| |
|
| ||
13 - Discard size | The Discard Size parameter only | ||
| defines the printing of received | ||
| faxes . The number of lines of a | ||
| document can be too high for the | ||
| printing | paper | format. This |
| parameter | defines | the threshold |
| beyond which the extra lines are | ||
| printed on a second page. Bellow | ||
| this threshold, extras lines are | ||
| deleted. |
|
|
| If you choose With, the threshold | ||
| is set on 3 centimeters. | ||
| If you choose Without, the | ||
| threshold is set on 1 centimeter. |
20 - E.C.M. This parameter helps correct the calls made on disturbed telephone lines. It is used when the lines are weak or too noisy. Transmission times may be longer.
- 29 -