ASSEMBLY

TO ASSEMBLE LEG STAND AND STORAGE BRACKETS

See Figures 10 - 11.

Separate the following: side brace (2), front brace (1), back brace (1), legs (4), miter gauge storage hook (1), rip fence storage hooks (2), foot braces (4), and leveling feet (4).

Locate the following parts:

8 hex nuts (3/8-16)

15 carriage bolts (5/16-18 x 5/8 in.)

15 hex nuts, flanged (5/16-18)

Place front brace inside first leg piece. Align holes on the

LEG

HEX NUT,

FLANGED (5/16-18)

BACK

 

BRACE

FRONT

 

 

BRACE

front brace with the holes on the leg piece. Insert two

carriage bolts and hand tighten using flanged hex nuts.

Attach a second leg piece to the other side of the front

brace using two carriage bolts and flanged hex nuts.

Repeat the above steps once for the back brace.

Place side brace inside leg piece. Align holes on side

brace with the holes on the leg piece.Secure the miter

gauge storage hook to the leg on the right side of the leg

stand. Insert two carriage bolts and hand tighten using

flanged hex nuts.

Place side brace inside leg piece. Align holes on side

SIDE

BRACE

CARRIAGE BOLT (5/16-18 x 5/8 in.)

FOOT

BRACE

LEVELING

FOOT

HEX NUT (3/8-16)

Fig. 10

brace with the holes on the leg piece. Secure the two rip

fence storage hooks to the leg on the left side of the leg

stand. Insert two carriage bolts and hand tighten using

flanged hex nuts.

This completes two of the four sides of the leg stand.

Thread one hex nut (3/8-16) on the screw on the leveling foot and turn until it stops.

Slip a foot brace onto the leveling foot before placing the leveling foot in the hole in the bottom of the leg. Secure with another hex nut.

Insert a screw through the hole in the leg stand.

Adjust the feet all the way to the bottom of the leg. Using a wrench, securely tighten all hex nuts.

SIDE

BRACE

MITER GAUGE

STORAGE

HOOK

 

FRONT

RIP FENCE

BRACE

 

STORAGE

LEG

HOOKS

 

 

LEG STAND ASSEMBLED

Fig. 11

18

Page 18
Image 18
RIDGID TS3660 manual To Assemble LEG Stand and Storage Brackets