Connecting the radio using UPnP
1.Press the On/Off button to switch the radio on. Then press the Mode button to select Music Player mode.
2.Press the Menu button to enter the main Music Player menu. Rotate the Tuning/Select control until "Browse" is selected on the display. Press the Tuning/Select control to select.
3.Rotate the Tuning/Select control until 'Shared media' is selected on the display. Press the Tuning/Select control to select. The radio will scan for all available UPnP servers. Note, this may take a few seconds for the radio to complete its scan. The radio will display '<Empty>' if no UPnP servers are found.
3.After scanning, select your UPnP server using the Tuning/Select control. If you are using WMP 11 as the server, your radio will then normally display 'Unauthorised - Select to retry' at this stage.
4.Your PC may prompt you that there has been a connection to your UPnP server. Whether prompted or not, to allow the radio to access the media files, you will need to click the 'Library' tab in WMP 11 and select the 'Media Sharing…' item to open the 'Media Sharing' window. Make sure the box 'Share my media to:' is ticked.
5.In the 'Media Sharing' window, the radio will be listed as an unknown device. Click on the unknown device shown to select it, then click the 'Allow' button and then click 'OK'.
Note: If you are using Microsoft Windows' firewall software, this should be correctly configured by WMP 11. If you are using third party firewall software you may need to manually configure it to allow your radio and WMP 11 to communicate (see 'Troubleshooting' on page 65).
6.Select the named server again using the Tuning/Select control. If WMP 11 is now able to communicate with your radio you will be presented with some media selection options on the radio display.
11
2
Unauthorised
Select to retry
Allowing a device to connect to Windows Media Player 11
33
