Roberts Radio WM-202 manual Setting the clock

Setting the clock

Normally the WM-202 Internet radio will set its clock automatically to UK time after a connection to the Internet has been established. Should you need to set the time manually, please follow this procedure.

1

1.Press the On/Off button to switch on your radio.

2.Access the main menu by pressing the Menu button until the 'Main menu' option is shown, then select this with the Tuning/Select control.

2

3.Rotate the Tuning/Select control until 'System setup' is highlighted on the display. Press the control to enter the system setup menu.

4. Rotate the Tuning/Select control until 'Time setup' is highlighted on the display. Press the control.

5. Rotate the Tuning/Select control until 'Set clock' is highlighted on the	2-7
display. Press the control to enter the clock setup. The hour digits will
flash.

6.Rotate the Tuning/Select control until the correct hour is shown on the display. Press the control to enter the selection. The minute digits will then flash.

7.Rotate the Tuning/Select control to select the correct minutes. Press the control to enter the selection. The display will then return to the previous menu.

53