Roberts Radio WM-202 manual Battery operation

Models: WM-202

1 72
Download 72 pages 59.77 Kb
Page 8
Image 8

Battery operation

1.Remove the battery cover on the rear of the unit by pushing the battery door in slightly and then downwards in the direction of the arrows in the diagram.

2.Insert six LR20 (D size) alkaline batteries into the spaces in the compartment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover.

3.Short running time, reduced power, dim display, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing.

4.If the radio is not to be used for any extended period of time it is recommended that the batteries are removed from the radio.

We would recommend for economy that the WM-202 is powered via theAC adaptor whenever possible with battery operation for occasional or stand-by use only.

IMPORTANT: The batteries should not be exposed to excessive heat such as sunshine, fire or the like. After use, disposable batteries should if possible be taken to a suitable recycling centre. On no account should batteries be disposed of by incineration.

1

7

Page 8
Image 8
Roberts Radio WM-202 manual Battery operation