Operating your radio - DAB
1.Carefully extend the telescopic aerial.
2.Press the On/Off button to switch on the radio. The display will show "loading". If the radio has been used before the last used mode will be selected.
3.Press the Mode button until the DAB mode is selected on the display.
4.If this is the first time the radio is used a quick scan of the UK Band III DAB channels will be carried out The display will show "Scanning". If the radio has been used before the last used station will be selected.
5.During the scanning process, as new stations are detected the station counter on the right hand side will increase and stations will be added to the list. The lower line of the shows a bar graph indicating the progress of the
6.When scanning is completed the first station (in
7.If the station list is still empty after the scan your radio will display "Service not available".
8.If no signals are found it may be necessary to relocate your radio to a position giving better reception.
2
3
39
