Roberts Radio WM-202 manual High, Low, Off, Dynamic Range Control settings DAB

Dynamic Range Control settings - DAB

Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment.

1.Press the On/Off button to switch on your radio.

2.Press the Mode button to select DAB mode.

3.Press the Menu button to enter the DAB menu list.

4.Rotate the Tuning/Select control until the display shows 'DRC'.

5.Press and release the Tuning/Select control to enter adjustment mode. The current DRC setting will be indicated with an asterisk.

6.Rotate the Tuning/Select control to select the required DRC setting (the default is Off).

DRC Off - DRC is switched off, Broadcast DRC will be ignored. DRC high - DRC is set as sent by broadcaster.

DRC low - DRC level is set to 1/2 that sent by broadcaster.

7.Press and release the Tuning/Select button to confirm the setting. The display will return to normal tuning mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.

1

2

3

	DRC	high	*
	DRC	low
4-7	>DRC	off

45