Roland GW-7 Using Effects, Adjusting the Reverb or Chorus Send Level, Editing the Effects

Performance Functions and Effects

Using Effects

The GW-7 contains built-in reverb, chorus, and multi-effect (MFX) processors. You can choose an effect type for each processor.

Adjusting the Reverb or Chorus Send Level

1.Press ANALOG MODIFY [SELECT] so EFFECT is lit.

2.Turn the C1 (REVERB) or C2 (CHORUS) knob.

Chorus is applied only if MFX is OFF.

Editing the Effects

1.Press [EFFECTS].

2.Use SELECT [ ][ ] to select a parameter, and turn the VALUE dial to edit its value.

Parameter	Range	Explanation
MFX	Refer to p. 20	Selects the type of multi-effect. It is memorized in each Tone.
		* For details, refer to “Multi-Effect List” (p. 20).
		* MFX are not applied to the following three types of tones.
		The lower part in Split mode
		The second tone in Dual mode
		Drum sets
Tone MFX	OFF, ON	Normally you will leave this ON. Only one setting can be saved in the entire GW-7.
		ON: When you switch the Tone, the MFX will also change.
		OFF: The MFX will not change when you switch the Tone.
Chorus	OFF,	Selects the type of chorus. It is memorized in each Performance.
	CHORUS 1–4,	* Chorus is applied only if MFX is OFF.
	FB CHORUS,	OFF: Chorus will not be applied.
	FLANGER,	CHORUS 1–4: These are typical chorus effects that add depth and spaciousness.
	SHORT DLY,	FB CHORUS: A chorus that produces a flanger-like effect, and a mild tone.
	S DLY FB	FLANGER: A metallic-sounding effect reminiscent of a jet airplane taking off and landing.
		SHORT DLY: Delays the sound, producing an echo effect.
		S DLY FB: A short delay will be repeated.
Cho Main	0–127	Adjusts the amount of chorus applied to the Main mode Tone, the Tone of the Upper Part in Split mode,
		or the first Tone in Dual mode. It is memorized in each Tone.
Cho Dual	0–127	Adjusts the amount of chorus applied to the second Tone in Dual mode. It is memorized in each Perfor-
		mance.
Cho Split	0–127	Adjusts the amount of chorus applied to the Tone of the Lower Part in Split mode. It is memorized in each
		Performance.
Reverb	OFF,	Selects the type of reverb. It is memorized in each Performance.
	ROOM 1–3,	OFF: Reverb will not be applied.
	HALL 1–2,	ROOM 1–3: These simulate the reverberation of a room. Higher-numbered settings simulate larger
	PLATE,	rooms.
	DELAY,	HALL 1–2: These simulate the reverberation of a concert hall. Higher-numbered setting simulate larger
	PAN DELAY	halls.
		PLATE: This is a digital simulation of a metal-plate reverb unit. It is particularly appropriate for percus-
		sive sounds.
		DELAY: A delay effect (without reverb), producing a repeating echo.
		PAN DELAY: A delay sound is repeated, alternating between the left and right channels.
Rev Main	0–127	Adjusts the amount of reverb applied to the Main mode Tone, the Tone of the Upper Part in Split mode,
		or the first Tone in Dual mode. It is memorized in each Tone.
Rev Dual	0–127	Adjusts the amount of reverb applied to the second Tone in Dual mode. It is memorized in each Perfor-
		mance.
Rev Split	0–127	Adjusts the amount of reverb applied to the Tone of the Lower Part in Split mode. It is memorized in each
		Performance.

3.When you’re finished editing the effect settings, press [EFFECTS] or [EXIT] to return to the previous screen.

19