Roland GW-7 owner manual Panel Descriptions, Front Panel

Panel Descriptions

Front Panel

1 2

1.VOLUME knob

This knob controls the volume of the entire GW-7.

2.D Beam controller

You can use this controller simply by moving your hand above it. (p. 16)

3.ASSIGNABLE buttons

You can use these buttons to turn the D Beam controller on/off, or to select the D Beam function. (p. 16)

4.TAP TEMPO button

You can use this button to set the tempo. (p. 14)

5.BACKING TRACK button

Press this button when you want the backing to play. (p. 14)

6.SYNC START button

This button activates the Sync Start function. (p. 14)

7.BAND TYPE buttons

Use these buttons to change the backing ensemble, or to use the minus-one function. (p. 14, p. 23)

8.SONG REC button

Press this button to record a song. (p. 21)

9.SONG CONTROL buttons

Use these buttons to play back the backing or song. (p. 14, p. 23)

10.ANALOG MODIFY section

Turn the C1/C2 knobs to control the functions you select by pressing the SELECT button. (p. 12, p. 14, p. 25)

11.Screen

This displays various information according to the operations you perform.

12.VALUE dial

Use this to edit the value of the parameters (settings) in the screen.

13.SELECT buttons ([ ][ ])

Use these buttons to change between screen pages, tone categories, or music styles.

14.EXIT (NO)/ENTER (YES) buttons

Pressed to issue the “Cancel” (EXIT) or “OK” (ENTER) commands in screens that prompt you to make such a selection. To listen to the demo songs, hold down [SHIFT] and press [EXIT]. (p. 9)

To use the metronome, hold down [SHIFT] and press [ENTER]. (p. 10)

15.EFFECTS button

This button lets you make effect settings. (p. 19)

To lower the pitch of the keyboard tone in steps of one octave, hold down [SHIFT] and press [EFFECTS]. (p. 11)

6