Cut tab
The Cut tab displays cut settings.
Resolution- Changing this value from the default is not recommended.
Passes- Specify how many times the blade will move over each line.
Curve Quality- Select how smooth you would like the curves to be.
Cutter Driver Options- Clicking this button launches the Cutter Driver Options dialog box, shown below.
Custom Head tab
None- When this mode is selected, Roland COLORCHOICE will not send any settings regarding the cutting operation. The settings in the printer panel will be used instead.
Cut Fast, Cut Medium, Cut Slow- When these options are selected, Roland COLORCHOICE will send the settings for the cutting operation.
Speed- Set the cutting speed. Usually setting a lower speed will result in longer cut times, but will produce higher quality results.
Cut Media - Check this option to cut the media after the output is complete.
13
