29
selection to RGB color if the file is an RGB file. Also, you must uncheck PostScript Color Management.
13 Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically, select Print in
the After Sending option. If you want to verify the print mode and the profile settings before printing the file,
select Hold. Select Hold in the After Printing if you want to keep the file in the Print Monitor after the file is
printed.
14 Click Print to start printing.
QuarkXPress 3
1 QuarkXPress requires a Printer Description File (PDF) to access specific options of the printer. Install the file
‘Roland ColorCAMM.PDF’ from Roland COLORCHOICE CD > Quark Files to the ‘Quark XPress:PDF’
folder, before starting QuarkXPress.
2 From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties. Then click the Print tab.
3 Make sure the Perform Color Correction checkbox has a check in it, correct profiles and rendering intent are set.
4 Click OK to close Setup Properties.
5 Go to Apple menu and select Chooser. Highlight Adobe PS and make sure ColorCAMM PC-600@... is selected.
6 Launch QuarkXPress. If you are using the EFIColor XTension, select Edit>Preferences>EfiColor and uncheck