Roland VK-8 owner manual Advanced Use, If the setting is an on or OFF switch

Advanced Use

State of the D BEAM Indicators in Edit Mode

❍When the setting is “0–127,” “0–10,” or “0–15,” “0–31.”

The minimum value (0) will be when the D Beam indicators are all dark, and the maximum value when they are all lit. As you increase the value, the D Beam indicators will successively light from the bottom.

Min Max

The setting will increase as you turn the [VIBRATO AND CHORUS] knob clockwise, and will decrease as you turn it counterclockwise.

When you press the VIBRATO AND CHORUS [ON] button, this will return to the default setting.

❍If the setting is an “ON or OFF” switch

This will be OFF (0) when all D Beam indicators are dark, and ON when they are all lit.

OFF ON

OFF ON

This will be ON when the [VIBRATO AND CHORUS] knob is turned to the right, and OFF when turned to the left.

When you press the VIBRATO AND CHORUS [ON] button, this will return to the default setting.

❍When the setting is “-5–0–+5,” “-6–0–+5,” “-100–0–+100,” or “-3–0–+3”

The lit location of the D Beam Type indicator shows the approximate value.

When the value is 0, the center D Beam Type indicator (RING MODULATOR indicator) will light.

D Beam Type indicators below the middle will indicate a negative value, and D Beam Type indicators above the middle will indicate a positive value.

Min 0 Max

Turn the [VIBRATO AND CHORUS] knob clockwise to increase the value, or counterclockwise to decrease it.

When you press VIBRATO AND CHORUS [ON], this will return to the default setting.

48