Connecting the
Connecting a Rotary
Speaker
In addition to providing a rotary speaker effect, the
NOTE
Connecting a speaker which does not meet the following
specifications may cause malfunctions.
The pinout for the ROTARY TONE CABINET connector
is as follows:
No.9 | No.8 | |
No.10 | ||
No.7 | ||
| ||
No.11 |
| |
| No.6 | |
No.1 |
|
Pin No. | Output data |
|
|
|
|
No. 1 | ORGAN & OTHER TONES |
|
|
No. 2 | ORGAN & OTHER TONES |
|
|
No. 3 | NC |
|
|
No. 4 | GND |
|
|
No. 5 | GND |
|
|
No. 6 | POWER ON/OFF CONTROL |
|
|
No. 7 | FAST CONTROL |
|
|
No. 8 | SLOW CONTROL |
|
|
No. 9 | NC |
|
|
No. 10 | NC |
|
|
No. 11 | +24 V IN |
|
|
*Pin Nos. 1 and 2 are the output of the organ voice and OTHER TONES.
*Pin Nos. 6, 7, and 8 are the open collector output, and are at a nominal voltage of
*Pin no. 11 detects the connection. If the nominal input voltage is outside the acceptable range
•The volume of the external speaker can be adjusted by the [MASTER VOLUME] knob.
•ROTARY [SLOW/FAST] button will switch the rotational speed of the connected rotary speaker.
•ROTARY [BRAKE] button will temporarily stop the rotation of the connected speaker. To resume rotation, press ROTARY [BRAKE] button again, or press ROTARY [SLOW/FAST] button.
NOTE
The rotary speaker effect of the organ voice will also be applied to the audio signal that is output from the ROTARY TONE CABINET connector. To prevent the rotary speaker effect from being applied to the audio signal that is output from the ROTARY TONE CABINET connector, press the ROTARY [ON]
No.2
No.3
No.5
No.4
button to make it go dark (off).
If you do not want Other Tones to be output from the ROTARY TONE CABINET connector, turn the [OTHER TONES LEVEL] knob all the way toward the left to set the Other Tones volume to zero. Alternatively, you can select a preset that does not include OTHER TONES.
62
