Runco CX-70DHD operation manual DHD Controller Front Panel

Controls and Functions

1.RS-232 IN

Connect the Display Control output on the DHD Controller to this input (see Figure 2-4).

2.RS-232 OUT Not used.

3.ANALOG IN Not used.

4.DVI IN

Connect the HDMI output from the DHD Controller to this input.

5.DVI OUT Not used.

6.POWER INPUT

Connect the CX-70DHD to AC power here.

Figure 2-3shows the controls and indicators on the DHD Controller front panel; the paragraphs that follow describe them.

2.2

DHD Controller Front Panel

3

CX-70DHD HDMI 1

16:91080i/60

11 10 9

	ra tio
standby	nt	er
i
	e
n
p
u
t
	r atio

i n p u t

m

e n u

1 2 3 4 5 6 7 8

Figure 2-3. DHD Controller Front Panel

1.RUNCO ICON

Lights blue to indicate that the controller is on or powering up.

2.IR SENSOR

Receives IR commands from the remote control.

3.VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the connected display device model, current source, input resolution and aspect ratio.

4.ON/STANDBY BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control.

CX-70DHD Installation/Operation Manual 7