Runco CX-70DHD operation manual IR Output Indicator, Enter, Return / Exit, Light, Menu

Controls and Functions

1.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

2.ON / OFF

Press to turn the display on or off.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Buttons (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9 DOWN Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - S-Video 2 - S-Video 1 - Composite Video

RIGHT Button = Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART - HDMI 1 - HDMI 2

5.RETURN / EXIT

Press this button to exit the current menu and return to the previous one.

Note	Not all remote control units have this button. If yours does not, use
	the MENU button (see below) to exit the current menu.

6.LIGHT

Press to illuminate the buttons.

7.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

8.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

9.COMP (Component) (2)

Press to select Component/SCART video input as the source or to enter the numeric character “2.”

12 CX-70DHD Installation/Operation Manual