SETTING UP PLAY BACK FUNCTIONS
MIC / UP button
When the LCD monitor is turned on, pressing the 
button will either cause the cursor to move up or change a selected sub menu.
When the LCD monitor is not turned on, pressing the 
button will allow a sound recording to be added to a stored still image.
1.Turn the camera on.
2.Rotate the mode dial to PLAY mode.
3.Press the LEFT ( 
) / RIGHT ( 
) buttons to select
image that you wish to add sound to.
4. Press MIC button ( 
) and the sound recording indicator will display. The camera is now ready to record sound.
5.Press the shutter button to start recording.
The [RECORDING..] message will be displayed on the
LCD monitor (as shown) and sound is recorded to the still image.
6. The sound will record for ten seconds. Recording can be stopped by pressing the shutter button again.
When you press the shutter button to stop the sound recording, press halfway and the buzzer sound will not be recorded.
40cm between you and the camera(microphone) is the best distance to record a sound.
PLAY & PAUSE / DOWN button
When the LCD monitor is turned on, pressing the 
button will move the cursor down or change the sub menu.
When the LCD monitor is not turned on, the 
button is used as the PLAY & PAUSE button. 
The PLAY & PAUSE button is used for playing and pausing a sound recorded still image, movie clip or slide show.
The PLAY & PAUSE button will only operate in single display mode.
