Samsung DVD-R125/XEH When using the ShowView function for, PR number manually by pressing

Using the ShowView Feature

Before presetting your DVD Recorder:

•Switch on both the television and your DVD Recorder.

•Check that the date and time are correct.

Up to twelve programmes can be preset.

1 With the unit in Stop mode, press the TIMER button. Press the …† buttons to select ShowView, then press the OK or √ button.

●A message is displayed to allow you to enter the ShowView code.

DVD-RAM(VR)

3	Press the OK button.
	●	The information concerning the programme is
		displayed.
	●	When using the ShowView function for the
		first time with stored stations, the programme
		number flashes. This one time, you must enter
		the PR number manually by pressing the
		…† buttons or number buttons.
			DVD-RAM(VR)				Scheduled Record List
							Recordable Time 02:12 SP
				No. Source		Date	Start	End	Mode	V/P	Edit
							No. 01
					Source	Date	Start	End	Mode	V/S
					PR 01	01/JAN(SAT)	12 : 00	14 : 00	SP	Off
					Recorda	ble Time 02:12 SP
			MOVE			OK		RETURN		EXIT
			DVD-RAM(VR)				Scheduled Record List
							Recordable Time 02:12 SP
				No. Source		Date	Start	End	Mode	V/P	Edit
		01	PR 01	01 JAN	12 : 00	14 : 00	SP	Off	√
				02	-- --	-- - --	--:--	--:--	--	--	√

Disc Navigation

Playlist

Disc manager

Enter ShowView Code number. [0~9]

MOVE OK RETURN EXIT

Recording

Programme

Setup

OK RETURN EXIT

Using the MENU button.

●With the unit in Stop mode, press the MENU button.

●Press the …† buttons to select Programme, then press the OK or √ button.

2 Press the number buttons to enter the code of the programme that you want to record in your television magazine.

●If you want to correct the ShowView code that you are entering:

●Press the œ button until the digit to be corrected is cleared.

●Enter the correct digit.

4 If the programme and times are correct, press the OK button.

5 Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting.

6 Refer to pages 47~49 if you want to:

● Check whether the timer Recording has set correctly or not.

● Cancel a preset recording

	■ The numbers next to each TV programme
	listing in the magazines or newspapers
NOTE
	are ShowView code numbers, which allow
	you to programme your DVD Recorder
	instantly with the remote control. Enter
	the ShowView code for the programme
	you wish to record.

■ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under license from Gemstar Development Corporation.

50- English