Samsung ECNV24HBBA, NV24 HD manual Sound Volume, Start up image Operation Sound

Setup menu ( )

● HDMI (High Definition Multimedia Interface) is a function that allows transferring the recorded images without compression by using the HDMI cable. You can see the images in a high resolution in the HDTV.

Setup menu ( )

Sound Volume

You can select the sound volume levels of start sound, operation sound and shutter sound.

● When Anynet+(CEC) is used and HDMI resolution is set to

[480p](NTSC) or [576p](PAL), it is only available to play back the

image, movie clip, voice.

● If the selected HDMI resolution is not supported by HDTV, the clear

image can not be shown in the screen.

● If you try to select the HDMI resolution that is not supported by

HDTV, the resolution is adjusted to the maximum resolution of the

HDTV. For example, if you select “1080i” when the HDTV supports

the “720p” by the maximum resolution, it is adjusted to “720p.”

● You can playback the normal resolution of the movie clip as well.

● You can not connect HDMI to HDTV which is not supported. Please

check up the specification of HDTV before connecting it.

- Sub menus : [Off], [Low], [Medium], [High]

Off	Sound Volume
Low	Beep Sound
Medium	Shutter Sound
High	Start Sound
	AF Sound

Exit:BACK

● For more information of the HDTV connection, see the user manual

of the HDTV.

Start up image

Operation Sound

If you set sound to [On], various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.

You can select the image that is first displayed on the AMOLED monitor whenever the camera is turned on.

- Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3]

- If you set sound to [Off], sounds will not be

Off	Sound Volume
Sound 1	Beep Sound

-Start up image : [Off], [LOGO], [User Image]

-Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode.

-The start-up image will not be deleted by [Delete All] or [Format] menu.

-The User images will be deleted by [Reset] menu.

Off	OSD set
LOGO	OSD set
User Image	Display Bright
	HDMI Size
	Start Image
	Exit:BACK

activated.

Sound 2	Shutter Sound
Sound 3	Start Sound
	AF Sound

Exit:BACK

<<65 >>