Connecting to a Power Source
■You can charge the rechargeable battery
■How to charge the rechargeable battery
or
Charging LED
When the cradle is not used
Charging LED
or
■Charging LED of the AC Adapter
| Charging LED | |
|
| |
Being Charged | Red LED is on | |
|
| |
Charging is complete | Green LED is on | |
|
| |
Charging error | Red LED is off or blinking | |
|
| |
Being discharged | Orange coloured LED is on | |
(Using the AC adapter) | ||
| ||
|
|
● Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause damage to the cable or camera.
●If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
●If you charge the battery with the camera power on, the battery can’t charge fully. Turn the camera off while charging the battery.
●If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. The camera may not be turned on because of the low battery capacity. Charge the battery for more than 10 minutes before using the camera.
●Do not use the flash frequently or take a movie clip with a fully discharged battery that has only been charged for a short time.
<<14 >>
