Searching Memories continued
Scanning For a Name Beginning
with a Particular Character
You can find the memory by the first
character of the name. This search can
retrieve all entries beginning with each
assigned initial character (follow the chart
on the page 15).
Press [SEARCH], and follow the steps at
right.
Window Message Your Response
Press the number key labelled with the
character or number you want to scan for.
For example, if you want to find the name
[EMI], press [3] which is labelled with [DEF].
If no name is stored with the assigned character,
[NOT FOUND] will be displayed.
The first name beginning with the character will
appear on the window. If this is not the name
you want, press to display the next, and
so on. It lets you scan forwards in alphabetical
order. To scan backwards, press
[Q
.
For example, the unit may display as shown.
Press
[
Dl.
The unit displays the next in
alphabetical order, of the names beginning with
D, E, or F.
Press
[
PI
repeatedly until you find the name
[EMI].
When you find the name or the number you
want, press [START/COPY] to dial the
number. With a document loaded, your unit
starts to send it. Otherwise, your unit makes a
phone call.