Samsung LF19SPZLSE/EDC, LF17SPZLSE/EDC manual Installation Instructions

I cannot see the On	Have you locked the
Screen Display.	On Screen Display
	(OSD) Menu to
	prevent changes?
The screen shows	Is the screen
strange colors or	displaying only one
just black and	color as if looking at
white.	the screen through a
	cellophane paper?
	Have the screen
	colors become
	strange after
	running a program
	or due to a crash
	between
	applications?

the monitor and restore the image on the screen.

Unlock the OSD by pressing the [

] button for at least 5 seconds.

Check the signal cable connection.

Make sure the video card is fully inserted in it's slot.

Reboot the computer.

	Has the video card	Set the video card by referring to the video card manual.
	been set properly?
The screen	Have you changed	Adjust screen image position and size using the OSD.
suddenly has	the video card or the
become	driver?
unbalanced.
	Have you adjusted	Adjust the resolution and frequency at the video card.
	the resolution or	(Refer to the Preset Timing Modes).
	frequency to the
	monitor?
	The screen can be unbalanced due to the cycle of the video card signals.
	Readjust Position by referring to the OSD.
The screen is out	Have you adjusted	Adjust the resolution and frequency of the video card.
of focus or OSD	the resolution or	(Refer to the Preset Timing Modes).
cannot be adjusted.	frequency on the
	monitor?
LED is blinking but	Is the frequency	Adjust the frequency properly by
no images on the	properly adjusted	referring to the video card manual
screen.	when checking the	and the Preset Timing Modes.
	Display Timing on
	the menu?	( The maximum frequency per
		resolution may differ from product
		to product. )

There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Problems related to Audio

Have the Windows	Windows XP :
colors been set	Set the resolution at the Control Panel → Appearance
properly?	and Themes → Display → Settings.
	Windows ME/2000 :
	Set the resolution at the Control Panel → Display →
	Settings.
Has the video card	Set the video card by referring to the video card manual.
been set properly?
Have you installed	Install the monitor driver according to the Driver
the monitor driver?	Installation Instructions.
See the video card	Install the monitor driver according to the Driver
manual to see if the	Installation Instructions.
Plug & Play (VESA
DDC) function can
be supported.
No sound	Ensure that the audio cable is firmly connected to both
	the audio-in port on your monitor and the audio-out port
	on your sound card.
	(Refer to Connecting the Monitor)
	Check the volume level.