Samsung M282x, M262x, M283x series manual IPv4 configuration using SetIP Windows, Setting IP address

Wired network setup

5

Setting IP address

First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall.

The following instructions may differ for your model.

1Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or

Downloads).

2Follow the instructions in the installation window.

3Connect your machine to the network with a network cable.

4Turn on the machine.

5From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP.

6Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window.

7Enter the machine’s new information into the configuration window. In a corporate intranet, you may need to have this information assigned by

a network manager before proceeding.

Find the machine’s MAC address from the Network Configuration Report (see "Printing a network configuration report" on page 104) and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8.

8Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are

correct.

2. Using a Network-Connected Machine 105