Wireless network setup

The machine is located away from obstacles that could block the wireless signal.

Remove any large metal objects between the access point (or wireless router) and the machine.

Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete.

The machine is located away from other electronic devices that may interfere with the wireless signal.

Many devices can interfere with the wireless signal, including a microwave oven and some Bluetooth devices.

Whenever the configuration of your access point (or wireless router) changes, you must do the product's wireless network setup again.

The maximum number of device that can be connected via Wi-Fi Direct is 3.

If Wi-Fi Direct is ON, this machine only supports IEEE 802.11 b/g.

If the access point is set to work with the 802.11n standard only, it may not connect to your machine.

2. Using a Network-Connected Machine 149

Page 149
Image 149
Samsung M283x series, M282x, M262x manual Wireless network setup