Samsung M283x series, M282x, M262x manual Turning the Wi-Fi network on/off, Click Wireless Custom

Wireless network setup

Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc

mode, you can use a wireless LAN and wired LAN simultaneously.

10 Insert the supplied software CD into your CD-ROM drive, and follow the instructions in the window to set up the wireless network.

Turning the Wi-Fi network on/off

If your machine has a display, you can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu.

1Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable.

2Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window.

For example,

3Click Login on the upper right of the SyncThru™ Web Service website.

4If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password.

We recommend you to change the default password for security reasons.

•ID: admin

•Password: sec00000

5When the SyncThru™ Web Service window opens, click Network Settings.

6Click Wireless > Custom.

You can also turn the Wi-Fi network on/off.

2. Using a Network-Connected Machine 143