Open Terminal program and go to the folder that you copied the package to.
Extract the package.
Move to uld folder.
Execute ” ./install.sh“ command (If you are not logged in as root, execute the command with “sudo” as “sudo ./install.sh”).

Installing driver over the network

9

Linux

You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads).

1Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set.

9

10

11

Click Add button.

Select AppSocket/HP JetDirect and enter your machine’s IP address.

Click Forward button and add it to your system.

2

3

4

5

6

Copy Unified Linux Driver package to your system.

7Proceed with installation.

8When installation finished, launch Printing utility (Go to System > Administration > Printing or execute system-config-printer

command in Terminal program).

2. Using a Network-Connected Machine 114

Page 114
Image 114
Samsung M282x, M262x, M283x series manual Linux, Command in Terminal program