SATO CX208/212 manual Clear Print Jobs & Memory, Command Structure, Special Note

CX208/212 Programming Guide

Clear Print Job(s) & Memory

Command Structure	<ESC>*a
	a	=	Specifies the internal memory section to be cleared
			T	To clear the custom character memory
			&	To clear the form overlay memory
			X	To clear all internal memory
	Example:			<ESC>*
				<ESC>*&
	Placement:			This command should be sent to the printer as an
				independent data stream.
	Default:			None
Command Function	To clear individual memory or buffer areas of the printer.
Input to Printer:	<ESC>AZ*
Printer Output:	There is no printer output as a result of this command. The current
	print job in the buffer will be terminated and all other print jobs in the
	buffer cleared.
Special Note	1. It is not necessary to clear the printer’s memory between each
		print job.

2. When the “a” parameter is used, the section of memory specified will not be cleared until the label is printed.

3. When the “a” parameter is not included, all sections of memory will be cleared (same as <ESC>*X).

Page 29 PN 9001092 Rev. A SATO CX208/212 Printers