SATO CX208/212 manual Journal Print, Command Structure ESCJ, Printer Output, Special Notes

CX208/212 Programming Guide

Journal Print

Command Structure <ESC>J

Example: See above

Placement: Immediately following <ESC>A

Default: None

Command Function To print text in a line by line format on a label. By specifying this command, you automatically select Font S with a Character Expansion of 2x2. You also establish a base reference point of H2,V2. The character pitch is 2 dots and the line gap is 16 dots. Simply issue an ASCII <CR> at the end of each text line.

Input to Printer <ESC>Q1<ESC>ZORYOU<ESC>USINGPOSITIONAJANYWITHPRINTEXTFONCOMMANDSTHECOMMANDSJURNALWITHOUTFEATURE

Printer Output

Special Notes	1.	Journal mode assumes a maximum label width. Otherwise, you
		may print where there is no label and damage your print head.
	2.	It is effective only for the current print job.

Page 44 PN 9001092 Rev. A SATO CX208/212 Printers