SATO CX208/212 manual Special Notes

CX208/212 Programming Guide

Special Notes	1.	Use of this command will set the Vertical/Horizontal Offset setting
		of the printer configuration until a new Base Reference Point
		command is issued.
	2.	This command may be used more than once in a print job.
	3.	An alternative to using this command is to make changes to your
		current Horizontal and Vertical Print Position commands.
		Example:
		Let’s say the current base reference point is H=1, V=1 and you
		wish to move all the fields on your label downward vertically by
		150 dots. You could either (1) add the Base Reference Point
		command or (2) change all the vertical position commands by an
		additional 150 dots.
	4.	For a more detailed example of the Base Reference Point
		command, see “Print Area” in this section.
	5.	The CX208/212 printers will not “wrap” (i.e. if any part of a
		character or image extends beyond the last print dot position, it
		will disappear and not be visible on any part of the label).
	6.	The allowable ranges for the fields are:
			CX208	CX212
	Horizontal		0 to 0832	0 to 1230
	aaaa
	Vertical		0 to 1424	0 to 2100
	bbbb		0 to 4060	0 to 3780

Page 20 PN 9001092 Rev. A SATO CX208/212 Printers