SATO CX208/212 manual Off-Line/Pause, Command Structure, Command Function, Input to Printer

CX208/212 Programming Guide

Off-Line/Pause

Command Structure	<ESC>@
	Example:	See above
	Placement:	Anywhere in the print job between the <ESC>A and
		<ESC>Z
	Default: None
Command Function	To specify the printer to come to an off-line state. When used within a
	print job, the printer goes off-line after finishing the print job.
Input to Printer	<ESC>ZA@...Job...
Printer Output	There is no printer output for this command. The printer is placed in
	the Off-Line mode as soon as the current print job is finished.
Special Notes	1. You must press the READY indicator key on the front panel to
	return the printer to an On-Line status .

2. Remember, when using this command, that the print job specifies <ESC>Q10, all ten labels will print before the printer goes off-line.

3. This command will clear the print buffer.

Page 49 PN 9001092 Rev. A SATO CX208/212 Printers