SATO CX208/212 manual Print Test Label, ESC Azct

CX208/212 Programming Guide

Print Test Label

Command Structure	<ESC>CT
	Example:	<ESC>CT
	Placement:	This command should be sent in a separate data
		stream
	Default:	There is no default for this command.
Command Function	To print a test label
Input to Printer	<ESC>AZCT

Printer Output

Special Notes	1. The Test Label can also be printed manually by simultaneously
	pressing the FEED and READY INDICATOR buttons. When the
	Test Label is manually initiated, the printer will be in the
	hexadecimal print mode after it finishes printing. This mode is
	used for diagnostic troubleshooting and lists the current status of
	the printer configuration. (see Page 9 of the User’s Guide).

Page 95 PN 9001092 Rev. A SATO CX208/212 Printers