SATO CX208/212 manual Print position of a field is affected by both the Rotate

CX208/212 Programming Guide

Special Notes	1.	The print position of a field is affected by both the Rotate
		(<ESC>R and <ESC>A3) commands.
	2.	If any part of an image is placed past the maximum number of
		dots for standard length.
	3.	If any part of an image is placed past maximum allowable dots
		across the label, that part of the image will be lost.
	4.	If you attempt to print where there is no paper, you may damage
		the print head.
	5.	For these commands, the leading zeroes do not have to be
		entered. The command V1 is equivalent to V0001.
	6.	The allowable field ranges are:
				CX208	CX212
			Maximum Print	832 dots	1230 dots
			Width	4.1 in.	4.1 in.
			aaaa	104 mm	104 mm
			Maximum Print	4060 dots	3780 dots
			Length	20 in.	12.6 in.
			bbbb	508 mm	320 mm

Page 55 PN 9001092 Rev. A SATO CX208/212 Printers