SATO CX208/212 Characters, Custom-Designed, Command Structure Store Command ESCTabcc, ESCK1H903F

CX208/212 Programming Guide

Characters, Custom-Designed

Command Structure Store Command: <ESC>Tabcc

Recall Command: <ESC>Kab90cc

a	=	1	16x16 matrix
		2	24x24 matrix

b= Specifies the character encoding method for the data stream

H Hexadecimal characters B Binary characters

cc= Memory location to store/recall the character. Valid memory locations are 21 to 52 (counting in Hex) or “!” to “R” in Binary

(data) = Data to describe the character

Example: <ESC>T1H3F

<ESC>K1H903F

Placement: The Store command is typically sent in its own data stream to the printer, between the Start/Stop commands.

The Recall command is sent in a secondary data stream to print the character,and follows any necessary position or size commands.

Default: None

Command Function To allow for the creation, storage, and printing of custom characters, such as special fonts or logos. Up to 50 individual characters may be stored in the custom character volatile memory.

Printer Input	Q1<ESC>ZT1H3F350<ESC>V100<ESC>L05051010<ESC>K1H903F
	0<ESC>100038007C00FE01FF03FF87FFCFFFE07C007C07C007C007C007C007C007C0AZAH

Page 21 PN 9001092 Rev. A SATO CX208/212 Printers