SATO CX208/212 Print Quantity, Command Structure ESCQaaaaaa, Input to Printer, Printer Output

CX208/212 Programming Guide

Print Quantity

Command Structure <ESC>Qaaaaaa

aaaaaa= Total number of labels to print (1 to 65535)

Example: <ESC>Q500

Placement: Just preceding <ESC>Z, unless <ESC>~ Cutter command exists, then preceding that. This command must be present in every print job.

Default: None

Command Function To specify the total number of labels to print for a given print job.

Input to Printer <ESC>H0100<ESC>V0100<ESC>WB1SATOZQ3

Printer Output	Three labels containing the data “SATO” wll be printed.
Special Notes	1.	To cancel a print job, you must turn off the printer.
	3.	When used with the <ESC>F Sequential Numbering command
		the Print Quantity value should be equal to the total number of
		labels to be printed.
	4.	If you do not specify a Print Quantity, the printer will not print a
		label.
	5.	For this command, leading zeroes do not have to be entered. The
		command Q1 is equivalent to Q000001.

Page 56 PN 9001092 Rev. A SATO CX208/212 Printers