SATO CX208/212 Custom Protocol Command Codes Download, Command Structure ESCLD,a,b,c,d,e,f,g,h,i

CX208/212 Programming Guide

Custom Protocol Command Codes

Download

Command Structure <ESC>LD,a,b,c,d,e,f,g,h,i

a= Replacement character for STX in ASCII or hex format

b= Replacement character for ETX in ASCII or hex format

c= Replacement character for ESC in ASCII or hex format

d= Replacement character for ENQ in ASCII or hex format

e= Replacement character for CAN in ASCII or hex format

f= Replacement character for NULL or ~ in ASCII or hex format

g= Replacement character for OFFLINE in ASCII or hex format

Command Function Printer Input

Printer Output

Example:	<ESC>LD,{,},%,#,&,*,~,0,0
Placement:	Immediately following the <ESC>A Start command and
in	an independent data stream.
Default:	Standard Protocol command Codes

Allows the user to defines custom Protocol Command codes.

<ESC>ZALD,{,},%,#,&,*,~,0,0

A ProtocolSTXENQOFFLINECommand==7B23CAN=7ETX==code7D26NULLESCstatus==252Alabel will be printed as a result of the a succeDfaultPressthemsfulheìFEEDîorpowerdownloadthekyprintertoactivateofofftocustomtheignoreUserset of Protocol Command codes. .

Special Notes	1. Commas must be used to separate the parameters. If a parameter
	is omitted between two commas, the default Non-Standard
	Protocol Command codes for that parameter will be used.

Page 91 PN 9001092 Rev. A SATO CX208/212 Printers