SATO CX208/212 manual Expanded Memory Function Graphics, Custom Store

CX208/212 Programming Guide

Expanded Memory Function

Graphics, Custom Store

Command Structure <ESC>GIabbbcccddd{data}

a= Specifies character format of the data H Hex data

BBinary data

bbb= Number of horizontal 8 x 8 blocks (001 to104)

ccc= Number of vertical 8 x 8 blocks (001 to178)

ddd= Graphics storage number (001 to 099)

{data}=	Hex or binary data to describe the graphic image
Example:	See below.

Placement: Immediately following the <ESC>CC Memory Area

Select command.

Default: None

Command Function To provide similar functionality to the <ESC>G Custom Graphic command, but allows for the graphic image to be stored in a Expanded Memory. Use the Store command to send the graphic data to the printer, which is held in the optional Expanded Memory, even if printer power is lost.

Printer Input 0100038007C00FE01FFC007C007C007<ESC>ZACC1<ES>GIH200200103FF87FFCFFFE07C007C007C007

Printer Output	There is no printer output as a result of this command. See <ESC>GR
	Recall Custom Graphics command.
Special Notes	1.	You must have the optional Expanded Memory to use this
		command. Call your SATO representative for details.
	2.	The maximum storage capacity is 999 graphics, up to the capacity
		of the memory expansion.
	3.	Each graphic to be stored must be sent in its own data stream.

Page 75 PN 9001092 Rev. A SATO CX208/212 Printers