Samsung M262x, M282x, M283x series manual Setting up the mobile device, Enable Wi-Fi Direct

Wireless network setup

From the machine (Machines with a display screen)

•Select Network > Wireless > Wi-Fi Direct from the control panel.

•Enable Wi-Fi Direct.

From the machine (Machines without a display screen)

•Press and hold the (WPS) button on the control panel for about 10- 15 seconds. Wi-Fi Direct feature turns on.

•Press and hold the (WPS) button on the control panel for more than 15 seconds. Wi-Fi Direct feature turns off.

From the network-connected computer

If your printer is using a network cable or a wireless access point, you can enable and configure Wi-Fi Direct from SyncThru™ Web Service.

•Access SyncThru™ Web Service, select Settings > Network Settings > Wireless > Wi-Fi Direct.

•Enable or disable Wi-Fi Direct and set other options.

• For Linux OS users,

-Print an IP network configuration report to check the output (see "Printing a network configuration report" on page 104).

-Access SyncThru Web Service, select Settings > Network Settings > Wireless > Wi-Fi Direct.

-Enable or disable Wi-Fi Direct.

Setting up the mobile device

•After setting up Wi-Fi Direct from the printer, refer to the user manual of the mobile device you are using to set its Wi-Fi Direct.

•After setting up Wi-Fi Direct, you need to download the mobile printing application (For example: Samsung Mobile printer) to print from your smartphone.

• When you have found the printer you want to connect to from your mobile device, select the printer and the printer's LED will blink. Press the WPS button on the printer and it will be connected to your mobile device.

•If your mobile device does not support WPS, you need to enter the "Network Key" of a printer instead of pushing the WPS button.

2. Using a Network-Connected Machine 145