Samsung M262x, M282x, M283x series manual Click Next, Operation Mode Select Infrastructure

Wireless network setup

8After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next.

If you cannot find the network name you want to choose, or if you want to set the wireless configuration manually, click Advanced Setting.

The wireless network security window appears when the access point has security settings.

Enter the Network Password of the access point (or router).

• Enter the wireless Network Name: Enter the SSID of the access point	9 If your printer supports Wi-Fi Direct, the following screen appears.
(SSID is case-sensitive).	Click Next.

•Operation Mode: Select Infrastructure.

•Authentication: Select an authentication type.

Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.

Shared Key: Authentication is used. A device that has a proper WEP key can access the network.

WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase), which is manually configured on the access point and each of its clients.

•Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES).

•Network Password: Enter the encryption network password value.

•Confirm Network Password: Confirm the encryption network password value.

•WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index.

•Wi-Fi Direct option appears on the screen only if your printer supports this feature.

•Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 144).

•Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 23 characters.

•Password setting is the numeric string, and the size is 8 ~ 64 characters.

2. Using a Network-Connected Machine 127