Operating advanced function
SETTING THE TIME
Your hydro unit contains a clock used to start and stop the unit automatically at a given time. You must set the time when you purchase the hydro unit or reset the main power.
1. Push the Set button for 3 seconds.
• Mode : Normal operation.
• When setting the time, you can only use Up, Down, Set, Cancel/Delete button.
• To cancel the setting, press the Cancel/Delete button.
2. Set the day by pressing Up or Down button.
The ‘day’ indicator will blink. Set the day and press Set button to save the setting.
3. Set the hour by pressingUp or Down button.
The ‘hour’ indicator will blink. Set the hour and press Set button to save the setting.
4. Set the minute by pressing Up or Down button.
The ‘minute’ indicator will blink. Set the minute and press Set button to save the setting.
After setting the minute, the operation returns to normal.
