Samsung NH300WHXES Field Setting Mode, Setting the Field Setting Value of wired remote controller

FIELD SETTING MODE

Setting the Field Setting Value of wired remote controller

Field setting mode is to adjust specific functions in accordance with customer’s demands.

Field setting mode is easy-to-access and programmable by the wired remote controller of hydro unit.

Field setting values are consisted of 4 digits.

Sub menu

Main menu

Adjusting filed setting values is available in the unit operation.

Default field setting value and range is on 32~34 pages.

1.Press the Test button for 5 seconds. The mode changes to the field setting.

In this mode, you can only use Up, Down, Set,

Cancel/Delete button.

To cancel the setting, press Cancel/Delete button.

2. Set the Main Menu by pressing Up or Down button.

The “Number” will blink. Set the Main menu and press Set button to save the setting.

3. Set the Sub Menu by pressing Up or Down button.

The “Number” will blink. Set the Sub menu by pressing Up or Down button. Then press Set button to save the setting.

4. Set the Operation Range(Field Setting) by pressing Up or Down button.

The digits in “Temp” category will blink. Set the Field Setting Value by pressing Up or Down button. Then press Set button to save the settings.

After 5 seconds, The LCD shall go back to initial display. If no input for setting value changes, the LCD shall go back to initial display after 30 seconds.

ENGLISH

Operating advanced function _29