If you cannot use infrared communication 1. Check BIOS setup.

a. Start the computer, and press <F2> to enter System Setup.

b. Select I/O Device Configuration in the Advanced menu, and press <Enter>.

c. Select Infrared Port, and set the item to Enabled by pressing <F5> or <F6>.

d. Save the configuration, and exit the Setup.

2. Check Windows configuration.

a. Click Start > Control Panel > Performance and Management > System > Hardware tab > Device Manager.

b. Double-click the “Infrared device”, and then double-click “IrDA Fast Infrared Port” item.

c. On the Advanced tab, select “Infrared Transceiver A” in the Properties field, then select “HP HSDL-2300/3600” in the Value field.

d. Click OK.

56 Users Manual

Page 69
Image 69
Samsung NP30TPHUV0/SEF, NP30RP54C2/SEG, NP30RH2GHQ/SHK manual If you cannot use infrared communication 1. Check Bios setup